LPM/MCM-IO48/96/44 - STD Bus 144/96/48 Point I/O with Event Sense

Warning! QuickMenu may have been blocked by IE-SP2's active content option. This browser feature blocks JavaScript from running locally on your computer.

This warning will not display once the menu is on-line. To enable the menu locally, click the yellow bar above, and select "Allow Blocked Content".

To permanently enable active content locally...

1: Select 'Tools' --> 'Internet Options' from the IE menu.
2: Click the 'Advanced' tab.
3: Check the 2nd option under 'Security' in the tree (Allow active content to run in files on my computer.)

Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
& STD Bus Products

Saturday, July 04, 2009

About Us | Contact Us | News | Careers | Support

LPM/MCM-IO48/96/44
STD Bus 144/96/48 Point I/O with Event Sense

SPECIFICATIONS

Digital I/O

Available with either: 48 or 96 or 144 digital I/O lines
Bidirectional lines with Input, Output or Output with Readback (WS16C48)
12 mA Sink Current

Event Sense

Supports 24 event sense lines for LPM/MCM-IO48, 48 event sense lines for LPM/MCM-IO96, and 72 event sense lines for LPM/MCM-IO144
Programmable polarity for each line
Software-enabled interrupt for each Line
Change-of-state latched for each line

Industrial Operating Temperature Range

-40°C to 85°C

Power

+5V required, .012 mA, .088 mA (for LPM/MCM-IO48), .013 mA, .089 mA (for LPM/MCM-IO96), and .014 mA, .090 mA (for LPM/MCM-IO144) typical

Additional Specifications

Compatible with industry standard I/O racks
Write-protection mask register for each port
Fused +5V logic supply for I/O modules

Datasheet | Manual | Software

OVERVIEW

The LPM/MCM-IO144/96/48 is a very versatile group of STD Bus cards providing up to 144 lines of digital I/O. Each line can be individually configured for input, output or output with read back. The major feature of this card is its ability to monitor both rising and falling digital edge transitions, latch them and then signal the host processor that a change of input status has occurred.

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

ORDERING INFORMATION

Product Model
Part Number	Description
LPM-IO48	CMOS STD Bus 48-line digital I/O card
MCM-IO48	STD Bus 48-line digital I/O card
LPM-IO96	CMOS STD Bus 96-line digital I/O card
MCM-IO96	STD Bus 96-line digital I/O card
LPM-IO144	CMOS STD Bus 144-line digital I/O card
MCM-IO144	STD Bus 144-line digital I/O card

Cables (valid for all Product Models unless otherwise stated)
Part Number	Description
CBL-115-4	4-ft., Opto rack interface
CBL-129-4	4 ft., ribbon cable, 50 pin. Both ends with 50-pin socket termination

DOWNLOADS

PDF Datasheet
Printable datasheet in PDF format	Datasheet

Manual
Electronic product manual in PDF format	Manual

Software Drivers & Examples
Examples
(For WS16C48 Digital I/O Chip)
Linux Drivers - Kernel 2.2, 2.4	linux_uio48_96.zip
Linux Drivers - Kernel 2.6	uio48io_kernel_2.6.zip
Windows XP Driver	wsuio48_96xp.zip
DOS Example C Functions	uio48a.zip