LPM/MCM-OUT48 - STD Bus Isolated Digital Output Card

Warning! QuickMenu may have been blocked by IE-SP2's active content option. This browser feature blocks JavaScript from running locally on your computer.

This warning will not display once the menu is on-line. To enable the menu locally, click the yellow bar above, and select "Allow Blocked Content".

To permanently enable active content locally...

1: Select 'Tools' --> 'Internet Options' from the IE menu.
2: Click the 'Advanced' tab.
3: Check the 2nd option under 'Security' in the tree (Allow active content to run in files on my computer.)

Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
SUMIT & STD Bus Products

Thursday, July 29, 2010

About Us | Contact Us | News | Careers | Support

LPM/MCM-OUT48
STD Bus Isolated Digital Output Card

SPECIFICATIONS

Digital I/O

48 Digital Output channels
Optically isolated outputs with an open collector transistor for every line
Diode clamp for inductive spikes from relays
De-bounced inputs
Each port configurable as Output with Readback

Additional Specifications

Dual 50-pin header connectors

Industrial Operating Temperature Range

-40°C to 85°C

Power

+5V required

Datasheet

OVERVIEW

WinSystems MCM-OUT48 is a 48-line, relay driver card for the STD Bus. Its medium voltage and current output capability combined with diode clamping, makes it well suited for driving relays, lamps, or medium current loads. The on-board resets all the output lines to de-energize relays upon either power-up or PBRESET to initialize the board to a known status.

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

ORDERING INFORMATION

Product Model
Part Number	Description
LPM-OUT48	48-line CMOS STD bus opto-isolated output card
MCM-OUT48	48-line STD bus opto-isolated output card

Cables (valid for all Product Models unless otherwise stated)
Part Number	Description
CBL-115-4	4-ft., Opto rack interface
CBL-129-4	4 ft., ribbon cable, 50 pin. Both ends with 50-pin socket termination